Measure to T-posts for inside mount frames

In this video, we'll be discussing how to measure for T post positions for an inside mounted shutter. Inside mount shutter frames include direct mount, hang strip and Z frame. The measuring principle for T post position is simple. Use the same measure format for measuring t post position as you would for the larger unit itself, and this is regardless of window type. It's the frame type that's important here, since direct mount, hang strip and Z frame all require using window opening measure format. When measuring t post positions with these frames, measure from the furthest inside left edge of the window or point A over to the center of your first T post or point B. If you have a second T post again, use the furthest left edge as your starting point, point A, and measure over to the center of your second T post or point C. The third, fourth and fifth T post positions are done in similar fashion. In other words, you're providing the factory with distances for measure points and A to B, A to C, A to D, A to E, and A to F for up to 5t posts. With this program, depending on the panel configuration you choose to use.