How To: Install SawHaul on John Deere Tractor

Alright, today I want to talk to you about how to install the saw haul onto a John Deere tractor. It's very simple. We've got all the parts in the box here along with instructions and very minimal tools required for the install. So first off, take all the parts out of the box and we've got different instructions here. So it can be mounted to a tractor the back of a utv. So you have multiple options there. But all the instructions, instructions are here, very simple to follow. All right, so the first step is we're going to mount the bracket to the plate. Very simple. Here we have two bolts that we're going to install with lock washers or lock nuts. I'm sorry. All right, so we're going to hand tighten these and then the, the tools required here we're going to need an allen wrench and a 9:16 open wrench. And we're going tighten those both sides down. All right, now that we have those tight, we're going to take the flat, flat bar and it's going to mount to the side of the frames here with the U bolt that's provided. We're going to start these by hand and so you can use wrench, a hand wrench is one way to do it or if you have an impact wrench makes the installation just a little bit quicker. So we're going to do that today with the impact wrench. Alright. So we're going to take turns tightening each side and make sure that's good and snug, which it is. And then the last step is to insert, insert the sleeve. Alright. So just make sure this is seated, seated tightly there. And then we're ready to install the saw. And it's that easy. As you can see, the, the loader arm can raise up and down. There's nothing in the way there, nothing to interfere with the operator station. So this is a great way to take care of your saw when you're at the farm cutting wood. So when you're thinking about cutting wood, think sunsow.