The Importance of Tire Inflation in Regards to Cutting Quality

This is Steven Brooks with the Montgomery location and today we're going to go over the importance of tire inflation when it comes to your cutting quality. This deck may look level and when you check it it's good on this side. See we're not quite there on the front and over here we're way for this particular model mower. According to the owner's manual your rear tires should be 10 psi and your front should be 15. So let's check them. We're right at 14 on that side. On this side we're about four and a half. So let's inflate the tire to where it should be. We're actually a little over inflated at 16 so we'll let some out so we're right equal with the other side and we'll check it again. The importance of making sure your tire pressures are correct to make sure your deck is level is if it's not correct you'll have an uneven cut.