The X9 Harvester gets tested in wet, challenging conditions across Lincolnshire fields. Multiple speakers walk through how the machine handles crop threshing and variable weather in real farming situations.
We've come to Lincolnshire, UK to understand more about our customers conditions to get into the Baltic smile and really understand more about the challenging conditions they faced.
So we've got a small chain of hills behind us and we are next to the sea, so we've got a lot of moisture coming in here every evening and therefore it's very clean and wet out here. And that's what we are here for.
To see these conditions.
We're here to prove that we can deliver in this very challenging condition for our customers. With performance uptime and cost of operations reductions, it's critical for our team to understand what's needed for the extra fine cut and premium residue packages.
So this would be the typical condition we face here in this area. So we've got a Skyfall variety window weed and what you can see here, the soil is still pretty wet, so we had a lot of rainfall the last days. So the lower part of the plant is also still green and it's pretty tough, so if you twist it, you can actually form it to a bale. Pretty tough straw. But then at the same time it's drying off, it's windy and we've got sun coming in, so it gets pretty brittle at the top. So the threshing is very easy, but then also separation is tough at the same time and that's very challenging for setting cuts and getting the machine run.
Properly and perform well. So what is important is to have easy distribution or the cleaning shoe. So in some conditions you have more shoe load to one side of the machine and that's always different if you have a single rotor machine, a twin rotor machine, hybrid machine or whatever pressure concept is. So that's what we are checking for now. So like in June, early July time frame, it's been too dry and therefore those kernels are, are really small and they didn't get enough water. The challenge with those is they are really hard to clean out. So if you take the fan speed too high, you would actually blow them off.
And also they are tough threshing if.
They are sitting in the upper part of the heads of the awn.
All right, so we've thrown around 180 lost trays today and now it's 8 o', clock, it's getting moist, so we are reaching the dew point. So it's getting really sticky now and we're going to start our last test right now. So as soon as the sun goes.
Down, everything gets really moist and wet.
And you can feel the difference straight away. I'm really impressed with the machine so far, especially with the separator and with the cleaning shoe, so it's going really well.
