This is a YouTube video titled "Cómo poner las riendas al caballo" created on July 12, 2013, providing a detailed instructional guide in Spanish on how to properly put a bridle on a horse, including handling the bit, reins, and headstall for safe and effective horse riding preparation.
Hello, welcome to a How to. Now we're going to explain how to put a bridle on a horse. To put the bridle on, you have to put this piece of metal in the horse's mouth. When you put it on, put your finger here so that it opens the teeth a little, separates them, and you can put it on. First of all, you have to let the horse go before putting the bridle on. You can also put them on top of the headstall, but it's much better to put them on underneath. Remember, you have to be careful that the horse doesn't get away from you. First. You. You put the reins here so that you have a holding point in case the horse escapes. You can hold it. And to put the bridle on, you have to get into this position. You grab the head so that it doesn't lift it. Put the iron on first, carefully, because this can hurt the horse. And if you want, you can use your fingers here at this point where it doesn't have teeth. You can put them on without any problem. They won't bite you. When putting on the bridle, you lift it all the way up. Hold it here with your left hand, and then carefully place it behind the ears. Keep in mind that horses are a bit sensitive with their ears. Many don't like to be touched. So when putting on the bridle, you have to be careful sometimes with the ears and above all, make sure they don't get pinched. Remove the hair from the bridle, remove it from underneath, and then proceed to attach the reins. There are many types of iron reins. Each horse needs its own. You have to try these out and adapt them to the horse, putting them on the one that both the horse and you are comfortable with. This is the chain. This is used to have a little more control over the horse. When you pull the reins, if you pull them, as you can see, they pull down and there is a point of attachment. Therefore, it would be a way of controlling the horse. Okay, here you can see that the horse already has the reins. The reins, the bridles. And now if you want to continue preparing, putting on the saddle and everything else to have a good grip, you can put the bit and the headstall on top. The horse will be tied the same as before. And with the bridles ready to ride.
