In this solo YouTube tutorial, the creator demonstrates how to clean a Sony camera lens by disassembling the unit, rinsing it with scalding hot water, and scrubbing both the exterior and interior with Dawn dish soap. The speaker emphasizes a forceful approach, claiming the lens can tolerate harsh scrubbing. While walking through each step—removing the outer body, accessing the motherboard, rinsing, applying soap, and re‑screwing—the presenter accidentally detaches the motherboard, warning viewers that such a mistake can permanently destroy the lens. The video concludes with a call for comments, a subscription prompt, and a final disclaimer that the method may cause camera failure and should not be tried at home.
Chapters
You don't want to be gentle. These things can take a lot of damage, and so you want to scrub the inside, scrub the outside. All right, today's video, I'm going to show you exactly how to clean your Sony lens cameras because this thing is old, it is dirty. Let's get right into it. The first and most important step, we're, we're gonna go to the bathroom sink and get the Dawn dish soap. And I know, I know, It's crazy, but listen, it's how you clean it. All right, so we're in our handy dandy bathroom, and the first thing we're going to do is turn on the hot water here and give it a good rinse. And so you want to make sure to get all in the crevices here. You're going to take off the outside of the body. Make sure to get the main motherboard here. Um, it gets dusty oftentimes. You can take off the screws if you want. Once that's good and rinsed off in very, very scolding hot water, what we're going to do is we're going take our Dawn dish soap, and you want to get in here right where the sensor usually is. And so this is because there's a lot of, uh, dust and particles, and you're just going to want to scrub, scrub really honestly pretty tough. You don't want to be gentle. These things can take a lot of damage. And so you want to scrub the inside, scrub the outside really good with that Dawn dish soap, and that's pretty much it. If you've ever cleaned— oh, Oh, there goes the motherboard on accident. Um, yeah, make sure it doesn't separate because that will destroy the lens completely and you won't be able to use it. But once you're done here, you can go ahead and make sure to shove that on here, rinse it all off, and then screw it back in and voilà, your perfectly new clean lens. I hope this video helped, and that's basically it. You have a brand new lens that is ready to go as long as you don't rip the motherboard off. Um, but yeah, it should work great. Let me know in the comments below, have you tried this out? What things do you use to clean your lens? And make sure to hit the subscribe button so we can continue to make videos like this. Hopefully it helped and brought tons of value, and we'll see you in the next one. Peace. Yo, so we might have an issue with the lens in the camera. I just tried to take a picture and, uh, it didn't work. So maybe don't try this at home.
