What regenerative farmers need to understand about micronutrient deficiencies | John Kempf, AEA

Hi friends.

Our focus for this discussion is going.

To be on how to manage trace mineral applications.

Over the last couple of years, as.

We have been speaking about the need.

To have trace minerals in the correct oxidation state, as we've been learning about.

Redox from Olivier Houson and the capacity of biology to convert minerals in the.

Soil, trace minerals in the soil, to.

Different oxidation states, there have been more and more questions about how to correctly manage these trace mineral applications.

Also as we have learned how some types of metrics of measurements, some types.

Of laboratory analysis don't correlate with actual field results.

So there's been the potential to create some confusion. I've received a lot of questions about.

How to manage trace mineral applications well, and my intent and hope is to.

Answer all those questions here as succinctly.

And coherently as possible with the different pieces that I have learned over the last couple of years.

And who knows, as we continue learning.

In a few years then some of this information might change as well. But we will cross that bridge as we get there when we think about trace mineral deficiencies. One of the pieces that I don't have on this slide, slide deck is.

Observing the nutritional deficiencies visually. And I will speak to that a.

Little bit as we go through this.

The reason I didn't include this is there's two reasons.

One is you want to have crops that have such strong nutritional integrity that you never see these visual deficiencies showing up in the first place. If the deficiency is so pronounced and so severe that it is showing up visually, you've already had a very significant impact on the crops yield potential. So that is part one and then part two is that while these nutritional deficiencies of, let's say of a manganese.

Deficiency, the symptoms of that are fairly.

Universal across as far as I know.

All crop types, at least those that I have experience with and I'm familiar.

With, and even non crop plants such as weeds and so forth.

But I do also know that for some of these trace mineral deficiencies indicators.

And symptoms, there is individual variability within different crops and some genetics show them up a bit differently than others. So that's something that I wanted to point out as well.

When we think about applying trace minerals.

The first piece of course that so many of us are now aware of, at least for myself I was not aware of this to this degree eight or nine years ago, is the need to apply the correct oxidation state.

Now this, the need to apply the.

Correct oxidation state for optimum plant performance.

Is not true for boron it's not true for zinc, and my understanding is.

That it's also not the case for molybdenum, but for all of the other.

Trace minerals, manganese, iron, copper, cobalt and selenium.

And there's obviously a much longer list.

Than this that we could speak about.

We could also speak about nickel and iodine and vanadium and rhodium and some of those other elements.

But for this conversation we'll be focusing.

Just on the primary, on the major trace minerals or micronutrients that we often think about managing and that we need to manage well. So these others that I mentioned can have different oxidation states.

Iron can be Fe with a double.

Positive, triple positive or quadruple positive.

And when they are in the oxidized form, they behave differently in soil microbial.

Populations and within plants. And for some of these, with manganese, for example, plants don't have the capacity to absorb oxidized manganese. In the case of iron, they can't absorb it, but they can't use it. So it's very important for the plants to.

For all these trace minerals, iron, manganese, copper, cobalt and selenium, the optimum is.

For plants to absorb them in the reduced form rather than in the oxidized form. Not going to get into the chemistry and biochemistry of what redox is and understanding different oxidation states.

If you want to dig into that a bit more deeply, I highly recommend Olivier Houson's free course on the academy academy.regen ag.

You can find that six hour course and you will absolutely love it.

Incredible information about understanding redox in plants.

And soils and how it impacts nutrition. So now the question becomes how can we have a product that is in the reduced form and remains in the reduced form?

Those are two very different things.

So the first is that we have.

To get the nutrients in the reduced form. And quite frankly, it is difficult to.

Buy minerals in a bag that are in the reduced form. If you purchase iron oxide, for example, all the oxides, all the trace mineral oxides, it is evident in the name itself, by the presence of having an oxide, that these nutrients, these minerals, are in the oxidized form. When we purchase sulfates, such as iron or manganese sulfate or copper sulfate, the sulfates contain the elemental expression is SO4.

So we have four components of oxygen.

Which also expresses that the sulfates generally are also oxidized.

So these first need to be converted, disassociated from their oxidizing components in a.

Solution and then converted to the reduced form and then stabilized. So that they stay in the reduced form. And when you get into the biochemistry of redox reactions, there's obviously some proprietary information here, because in our work at advancing eco agriculture, we have our rebound line of trace minerals, which are developed in this way to be reduced and to remain stable in a reduced form. So biochemists will be able to help.

You figure this out if you don't.

Have access to those materials, to AEA materials if you're overseas or something like that.

But the key element is that they.

Need to be converted to the reduced form and then chelated so that they.

Stay in the reduced form.

And this is particularly relevant for foliar applications and also for in furrow applications at planting.

Chelation is not optional.

They need to be chelated.

And there are two reasons for why.

Chelation is not option not optional.

The first is that if you have.

A reduced trace mineral ion, let's say manganese, for the sake of discussion. If you have reduced manganese in the spray tank, you spray it out through a nozzle, it lands on the leaf surface, A small droplet dries on the leaf surface, and as it dries, it now is exposed to oxygen in the air, and it can become oxidized very, very quickly.

So to prevent oxidation the leaf surface, these trace minerals need to be chelated.

And then also once they have been absorbed by the plant, chelation will improve absorption by the plant itself, which is.

Really important as well.

And then there are different chelation agents have different effects.

But the best chelation agents are those that also provide phloem mobility.

They allow these trace mineral chelates to move around inside the plant. So you spray it onto a leaf.

And it can move from the leaf.

Into the fruit or down into the root system.

And this is very important if we.

Want to use trace minerals to provide disease resistance, for example. So it is known that when we have abundant manganese in the root system.

That can provide the cerium resistance because.

It gives the plant the materials that it needs to produce corking in the cells and to insulate off and to create a barrier to prevent wherever an infection has occurred from propagating through the rest of the plant.

Those reactions are dependent on manganese. If we want to move manganese from.

The leaf down into the root system to have this effect, it needs to be chelated.

Manganese sulfate applications will not provide any.

Results because it's not chelated and doesn't move down into the root system. So the need for chelation is particularly.

Critical for foliar applications.

It is also critical for in furrow applications at planting.

And the only case in which I.

Would suggest that chelation is not needed is when we are making soil amendment type applications. And the soil amendment type applications are.

Only appropriate for some trace minerals in some situations.

So let's get into that.

Looking at each of these minerals one on one. Starting with boron, I wanted to kind.

Of provide an overview of how we see the different lab reports correlating with actual field results.

We find that soil analysis are generally.

Accurate and that tissue analysis generally inaccurate.

And the inaccuracy can vary depending on.

The speed of plant growth.

The SAP analysis we find to be the most accurate.

And we do find that for boron, soil amendment applications of boron are appropriate.

It is the least expensive and the.

Most efficient and effective generally to put on boron applications for an entire crop year in advance, Unless we live in an environment where we have extremely high rainfall and it can leach out.

So all the various different forms of boron work well.

This is not one of the elements.

Where we have to be concerned about different oxidation states. Solubor or disodium octavorate tetrahydrate has different brand names, different trade names, but it.

Is the most soluble 20.5% boron content, the easiest to dissolve and to apply.

The form of boron that plants absorb.

The most easily is boric acid. And it is also the easiest one to produce toxic effects with.

With boron, we often many growers and.

Many companies chose not to use boric.

Acid for that reason because of concerns about toxicity effects.

Then of course, if you want to do a dry broadcast application, you can use any of the dry 10% Boron granular products. My preference for a soil amendment application.

Is to spray it on rather than broadcast spread it because of distribution, we.

Get much better distribution, much more uniform and much more even distribution if we spray it onto the soil rather than.

Broadcast it, and we end up with.

One pellet over here, another pellet three feet away.

Our typical recommendations are for a half pound of actual boron per acre.

So this is not a boron product, as in a 10% product, but 0.5.

Pounds of actual boron per acre for.

Each 10 inches of annual water application from rainfall. So if we are here in the eastern United States, where we get 40 inches of rainfall a year, we know that that 40 inches of rainfall has the capacity to leach about 2 pounds of boron out of our soil profile.

Because boron is an anion, just like nitrogen and sulfur, and leaches out through.

Our system fairly Easily until we develop.

High organic matter content soils that hold.

The boron stably with a strong anion exchange.

And then once we have a strong anion exchange capacity, we often find that.

We don't need to continue these repeat boron applications.

But until we get to that point.

We routinely recommend boron as an annual application, as a soil amendment type application.

And then we continue those applications until.

Our soil report shows us that our boron levels are being maintained stably at.

3 parts per mil in the soil profile. At that point, we back off applications.

And don't continue any further applications into.

The future unless either SAP analysis or.

Soil analysis shows that they're dropping off again for some reason.

In a truly regenerative system, they should.

Remain fairly stable and we shouldn't see that drop off into the future for foliar applications. We make foliar applications of boron on many, many different crops. And the only consideration to really think about is we need to consider that we have adequate calcium levels, particularly for the sensitive crops.

The symptoms of a boron excess are the symptoms of a calcium deficiency. It is possible if you have excess of boron showing up for any reason. Simply put on a foliar application of calcium and it will fix the problem. Depending on how severe the problem is.

And the rate of plant growth and.

The context, it can reverse the symptoms, the visual symptoms, anywhere from 48 to 72 hours.

So sometimes it takes a bit longer.

Sometimes a bit less.

But that's a reasonable window to expect.

A calcium application to fix a boron toxicity symptom. Next, we look at cobalt. Soil reports are generally accurate. Tissue reports seem to be generally accurate. Cobalt is an interesting element.

I read somewhere or learned that cobalt.

Tends to concentrate in the root system.

In the growing root tips, I'm actually, I do recall now an agronomist from California shared that when you do a root analysis in addition to a tissue analysis, you will quickly discover that 90% of the cobalt within a plant is in the root system, not in the leaves.

And I find that to be really.

Interesting because of its association with cytokinin synthesis and inhibiting ethylene synthesis. So lots of interesting relationships that happen with cobalt. SAP analysis also is very accurate.

And cobalt is one of these elements where it does exist in the soil.

In different oxidation states.

But we do find good crop responses and good biology responses from cobalt applications.

To the soil in the form of cobalt sulfate. And my hypothesis, I don't know this.

For certain, but my hypothesis is the.

Reason this is the case is because Cobalt is so critical for soil biology.

Soil biology has such an extremely high.

Requirement for cobalt to form vitamin B12, cyanocobalamin or methylcobalamin that when cobalt is.

Applied, it is mostly very rapidly consumed.

By the soil microbial community, and thus.

It doesn't exist in the soil profile.

In the oxidized state very long at all. Again, because of application rates, typically we're looking at desired levels.

Depends on what type of soil analysis you're running.

Is it Melik 3 or DTPA type extraction. But typically looking at desired values in the neighborhood of 0.5 to 1 part per million. And our preference because of soil variability is to use foliar applications to make sure that we have enough during the growing season.

When we look at copper, we find.

That tissue analysis often doesn't actually correlate. It's somewhat inaccurate.

SAP analysis is the most accurate.

For those of you who listen to these webinars and listen to me a lot, you know that we are big advocates of SAP analysis because of its accuracy in these regards. And we very seldom but occasionally recommend.

Soil applications of copper in the form of copper sulfate.

The conditions where we would make such a recommendation would usually be on very light, sandy soils that do not have.

Copper in the geological profile, and where copper levels are extremely low, and where copper levels are not being applied for.

Bacterial control in the form of bacterial.

Copper sprays and so forth. In these types of situations and scenarios, we would often recommend putting on copper.

Sulfate sprayed onto the soil again for best distribution, uniform distribution.

And it's important everyone focuses on the.

Downside of copper application in the soil, which is significant.

Copper. Copper levels in the soil can inhibit.

And do inhibit microbial populations. As the levels get higher and higher, they slow down the microbial populations more and more until you cross a threshold of about 30 parts per million. And from what I have learned from colleagues, I haven't experienced this myself very often, but what I have learned from others is that when you cross the.

Threshold of 30 parts per million, soil.

Biology becomes severely compromised very quickly. And our typical recommendations in the consulting work that we do at advancing eco agriculture to mostly focus on foliar applications.

And only very occasionally do we make a soil application recommendation. Now we get to the fun ones.

The really fun ones.

Iron. The soil report is grossly inaccurate. It has zero bearing on reality with.

What'S actually happening in the soil context.

A very significant statement to make, but.

One that we have very much observed to be true.

We know that the earth's crust is approximately 4% iron. There is no shortage of iron in.

Most of our soil profiles and there should be no need to ever add.

Iron to our soils.

However, the majority of the iron that is in our soil profile is in the oxidized form, in a form that.

Plants can absorb but not use.

And because they can absorb it but not use it, this also makes the.

Tissue analysis dry matter based tissue analysis completely inaccurate. There is no correlation between the iron.

Report on a tissue analysis report, the iron measured iron content and the iron sufficiency of the plant. In fact, just the opposite.

Many times when we put whole soil.

Analysis or tissue analysis on many mineral soils in temperate regions around the world.

We find that the soil analysis shows.

We have excess of iron and the tissue analysis shows that we have excess of iron, and yet the crop is showing us iron deficiencies.

I should qualify and clarify that statement. Most plants don't show iron deficiencies because.

They are covered up excess of nitrogen.

So when you have a plant that.

Has an abundance of nitrogen, that abundance of nitrogen will cover up the iron deficiencies so that you don't see it visually, but it is still there and it's still affecting plant performance.

Once you begin managing plants a bit.

Differently and they no longer have the excess of nitrogen that is causing all.

Types of other plant health problems, then you can go out, put on a foliar application of a reduced iron, see what happens. You can paint your name in the.

Grass and you'll be able to see your name showing up in the grass in a matter of a few days. You have this very pronounced iron response.

Even when the tissue analysis shows that.

You have abundant levels of iron within the plant.

The problem is that the iron within.

The plant is not physiologically active. In fact, we have worked with a number of growers, farmers who. It's particularly true of forage producers, people who are growing hay or forages for livestock and dairy.

For example, when they're conducting a forage.

Analysis and a SAP analysis side by side, they're using the SAP analysis to manage.

Applications of nutrients, foliar applications, to.

Try to produce the highest forage quality possible.

At the same time, they're doing a forage analysis, not so much necessarily for.

The manganese and iron and zinc content.

As to measure the forage protein content.

And carbohydrate profile and fat profile and so forth, digestibility, etc.

What we have observed, but essentially then.

The mineral profile of a forage analysis generally is a wet chemistry analysis. With the labs that our growers use, it can also be nir near infrared.

But we generally recommend the wet chemistry analysis.

And so we have a dry matter based tissue analysis that's a wet chemistry, very accurate compared to a SAP analysis.

And we've observed some very interesting correlations with iron. When growers are typically the forage analysis.

Will have will show excessive levels of iron, 40, 60 to 80 to 100.

Parts per million or more. And the SAP analysis shows deficient levels of iron. The SAP analysis, and let me be.

Clear, I'm not a laboratory technician.

I don't understand the differences in the processes. I don't understand why the SAP analysis.

Doesn'T show the oxidized form of iron like the tissue analysis does.

I don't know why the difference is in those assays, but I know from.

A lot of experience that it's very real and it shows up.

So on these forage tests we'd have.

Very high iron levels and the SAP test very low iron levels. Then the farmer begins putting on foliar.

Applications of iron as a result of.

SAP analysis showing low.

And the iron levels on the SAP.

Analysis went up very, very quickly.

And as the iron on the SAP analysis levels increased, the iron on the.

Forage analysis decreased and it went down.

To be in the vicinity of the desired range. I found this really intriguing.

My interpretation of that is my hypothesis.

Again, I haven't deeply dived into all.

The mechanisms, but my hypothesis is that it appears, it seems as if though once the plant is getting iron in.

The correct form that is physiologically active.

It no longer continues to consume excessive iron in the wrong form from the soil profile.

So the reason, it seems as if.

Though these plants that are getting oxidized iron from the soil continue to consume it and consume it and absorb it because they recognize that they're iron deficient and they need more and they're trying to get everything they can order to get it in the right state.

And this is a separate conversation for another time. But these high concentrations of iron lead directly to a plant that is not functioning as well as an antenna. Lower absorption of manganese and zinc and.

These other trace mineral metals and significantly increases disease susceptibility.

So these excessive levels of iron in.

The wrong form are a significant challenge from a disease resistance perspective. And also something we need to think about for organic certification is that in order to apply these trace minerals, we need to have a documented deficiency.

And with a tissue analysis or a.

Forage analysis or a soil analysis in most soils in North America and around the world, you will constantly have documented excesses rather than deficiencies because the extraction.

Is extracting things that the plant can't actually use.

So for these reasons, we use SAP analysis as well. And we actually use SAP analysis also.

To produce a documented. To describe a documented efficiency for the.

Growers that we work with.

So because of iron being so abundant.

In our soil profile, we practically never recommend a soil application. And when we do, it would only be in soils with no iron in the geological profile.

Again, perhaps very sandy soils that are fundamentally beach sand.

And instead, we focus on developing biology.

To convert the iron in the soil.

Profile from the oxidized to the reduced form. And as I described here, foliar application is what we prefer and what we focus on. And because of this oxidation imbalance that is present in many aerated soils and.

In many tilled soils, the crops that.

Are grown in a lot of mineral soils are almost universally deficient. And this is also true in soils that have lots of fertilizer applications.

Nitrates, limestone, and so forth all have an oxidizing effect. And the key here is not to.

Apply more to the soil, but to change the soil's microbial profile so that.

We release the iron that is already present.

We shouldn't need to buy any more.

There's a similar case with manganese, with some slight differences.

Manganese and iron are not quite the same. What we have observed is that the soil report is somewhat accurate at showing what is available for plant absorption.

The tissue report is grossly inaccurate, does not correlate to.

Well, let me, let me clarify.

It is very common for manganese applications.

To be made foliar applications to be sprayed on the plant and remain on the leaf surface, but not actually be absorbed into the leaf. And when this occurs, it makes the tissue analysis extremely inaccurate because you can't really wash. And what we've observed and experienced is that you can't really wash a manganese residue off the leaf surface very easily. So it shows up on the tissue analysis, but it has no bearing on.

The quantity of manganese the plant has actually absorbed. SAP analysis, again, we find to be the most accurate. And I don't need to get into.

All the history and some of the.

Stories that we experienced, but when we.

First started using SAP analysis, it was very common for us to make recommendations for manganese sulfate foliars because we would put on manganese sulfate as a foliar.

We collect the tissue analysis, and the.

Needle moved very quickly. We thought we were making a difference.

When we started using SAP analysis, we.

Quickly learned that we were not making a difference. The needle Was not moving.

And so we did find that the.

SAP analysis did not extract the nutrients that were on the leaf surface.

So when we look at the applications, the types that we recommend, we almost never recommend manganese as a soil application for the same reason as iron.

Many mineral soils, and this is casting a really broad blanket, Lots of generalities. You can get this tested and measured, and should.

But many soils contain manganese in the.

Upper 6 inches in the range of.

2 to 400 pounds per acre, sometimes.

More, sometimes a little bit less. Certainly high enough that you very seldom.

Should need to add additional manganese to the profile, Similar to iron. The objective should be to stimulate biology to extract the manganese that is already.

Present in the soil mineral matrix and make it available to plants. And the only cases where we would really consider making recommendations for manganese applications Would be in those soils that don't have this manganese base in the geological profile. Muck soils, for example, or very sandy soils. And for all the reasons that I've already described, we recommend lots of foliar applications, and we see a lot of deficiencies. The manganese deficiency signals are almost universal, and I've described them before. But manganese deficiency is when the veins of a leaf are lighter in color.

Than the area between the veins. At the very least, they should be uniform.

They should be exactly the same color, a uniform dark green.

But when the veins themselves are lighter.

Than the area between the veins, that's a signal of a very slight manganese deficiency. And that signal is almost universal on weeds, on grasses, on grains. Because of the ways that we have managed our soil profiles.

Except for those crops which are grown.

In very reduced environments that have an abundance of manganese availability, like cranberries and blueberries, for example, they often don't exhibit signs of manganese deficiency because they're grown in a very reduced environment, in some cases, not in all cases, they can be grown in very reduced environments that have abundant manganese availability, and then they do not show those symptoms.

When we look at molybdenum soil reports.

Tissue reports are both somewhat accurate.

Molybdenum is an anion, like nitrate, nitrogen.

And sulfur and boron. So it leaches out of the soil profile. It's extremely available at high phs, and we occasionally recommend it to be applied to soil.

Again, we're looking at very small amounts, grams or ounces per acre, and we.

Really prefer to see it applied as a foliar application, because then we know.

That it gets into the rhizosphere.

And this is actually an important point.

Is when you consider a soil correction, particularly in a perennial environment where you're.

Growing, let's say an orchard or grasses, if you broadcast a soil amendment application onto the soil surface, then over a period of time, it will be acted.

Upon by biology and absorbed by the.

Plant and moved throughout the entire plant structure. Hopefully, this can be a process that takes weeks to months, depending on the.

Context, moisture conditions, and microbial activity, and so forth. When you put on a foliar application, it can be immediately absorbed by the plant, distributed throughout the soil profile, not.

Just in the top half an inch.

Or so of the soil profile, but.

It actually gets moved down deep into the soil, as deep as the roots go. So this is not what you might want to consider for a boron application. Or perhaps you might, if you want to.

If you have a cover crop, and perhaps you want to move copper and zinc and manganese into the soil profile to a depth of 6, 8 inches.

Or more very quickly, then you can simply spray the COVID crop with a very strong application of trace minerals a few days before terminating it or a few days before incorporating it.

And you have this effect where it.

Can move the trace mineral down through the soil profile very quickly and very effectively.

You can actually move trace minerals through.

The soil and not just have them be on the leaf surface, but by using the plants as a vehicle to move them down a bit more deeply.

When we look at zinc, zinc is.

The one trace mineral metal that doesn't exist in the soil in different oxidation states. So it is the one trace mineral that I'm most comfortable. And we see the biggest responses, crop.

Responses from soil applications.

So soil reports, generally accurate.

They correlate with what the plants are telling us.

The tissue analysis is somewhat accurate as well, at least in terms of measured zinc absorption from the soil.

And SAP analysis, again, is very accurate. I actually think so. In mainstream production agriculture, zinc is the.

One trace mineral that is widely used.

It's applied in furrow when planting corn. It's often foliar applied, and it is.

The one trace mineral.

The reason it's so widely used is.

Because it is the trace mineral that has been the most documented as providing a yield response, which is a bit.

Crazy, because manganese, if anything, gives an even bigger yield response than zinc does. Copper and boron also provide significant yield responses. I believe the reason zinc has been.

The one trace mineral that has really.

Been focused on by mainstream agronomy is.

Because it is the trace mineral that.

Works even in compromised soils with compromised biology. It's the one trace mineral that doesn't.

Have different oxidation states.

If the same degree of research was done with the reduced and chelated form of manganese. Manganese will also be equally widely used as zinc. But it's not because it is, it.

Needs to be managed a bit more carefully than zinc does.

We are very comfortable making recommendations for.

Zinc as a soil application in the.

Form of zinc sulfate.

From a distribution perspective, we again prefer to see sprayed on rather than broadcast.

And foliar applications are also very effective.

As long as they are chelated.

And again, the reason for chelation in.

This case is not to change the oxidation state or stabilize the oxidation state.

But to have efficient absorption and translocation.

Within the plant once it is absorbed. So, as I mentioned when I was speaking about iron, it's important to think about the types of laboratory testing that you need, that you need to accurately document deficiencies if you're seeking to be organically certified.

Another point to make is that naturally.

Derived sources of trace minerals, such as rock powders and such as compost, seldom.

Contain high enough concentrations of these trace minerals to correct soil deficiencies. And I'm referring in this context specifically.

To zinc and manganese and copper.

Actually, copper is an exception. In livestock environments where copper is used.

As a foot treatment or as a dip treatment, it is sometimes possible to.

Find compost that has very high copper.

Levels, high enough that they can become a problem, actually.

So in some contexts we can provide. We can find these more natural type materials that contain higher concentrations of copper.

But usually we should not think of rock powders, for example, mined rock materials, as changing the levels of zinc, manganese, copper, cobalt in the soil profile.

They may supply adequate levels of the.

Ultra trace elements, such as selenium and.

Nickel that are required in fractions of.

A part per million. They may be able to supply some of those elements, but usually they're not.

Able to supply adequate levels of zinc.

Manganese, iron, and so forth.

Those really need to come from our soil geological profile or from the more purified forms of trace minerals that we.

Add directly until we get soil biology releasing what is in our soil mineral matrix. Many of you are familiar with our.

Rebound trace mineral lines.

They are developed so as to be.

In the reduced oxidation state for all.

The minerals for which that is appropriate.

And to be chelated with organic chelation.

Agents that provide for efficient absorption and.

Translocation within the plant and show good.

Results based on SAP analysis performance. So those are the thoughts that I'm going to share.

I'm going to switch To Q and.

A. I've seen lots of questions coming in. Thank you for those.

First question from Charles Bergeron.

Hi, John, we have sandy soils with about 5,500 pounds of per acre calcium in calcareous soils.

Are we further reducing micronutrient availability in.

The soil by applying more calcium, such as gypsum at planting and chelated calcium in the irrigation foliar?

Or do plants in calcareous soils still.

Benefit from these types of calcium applications if microbial activity is not optimal?

Charles, this is an awesome question, and.

The answer to your question is no. Additional calcium applications such as gypsum will not further reduce trace mineral availability because your reduced trace mineral availability in calcareous soils is coming as a result of oxidation, which limestone is very effective.

It's a very effective oxidizer.

And the reason for that is because of the carbonate component. So it's CaCO3.

It's those three elements of oxygen that.

Are in the carbonate that have the oxidizing effect.

So it's not the calcium that has.

The oxidizing effect, instead it is the carbonate. So when you look at gypsum calcium sulfate, you do also have the presence.

Of oxygen in sulfate form.

But when you look at the quantities of oxygen applied, they're comparatively small in gypsum as compared to limestone.

And so you do not have nearly.

The oxidizing effect with gypsum that you do with limestone. And I would highly recommend using it.

In calcareous soils if you need a fertilizer grade. Calcium. Another question here from Skip Lacroix, Southwest Missouri. I have 84% calcium on my Logan Labs soil test. Basically, I have soil made of limestone. Is there a point in trying to amend these soils or should I just bring in soil? And what would be a good starting point? So this is for small scale, for gardening. The answer is yes, you can amend your soils. And you can amend your soils as.

You increase organic matter. Your organic matter should have a significant cation exchange capacity.

And as organic matter increases, your 84%.

Calcium can drop down to 60 to 65% calcium as you increase your CEC. And of course, I don't know the rest of the context. It's not enough to look at calcium just purely as a percentage number, because if it's 84% on sandy soil and it represents 500 parts per million, it's still not enough. So there's more to be considered there.

But in general, you can increase cation exchange capacity and reduce your calcium percentage within reason.

And I know that you're in Missouri and not somewhere in North Dakota where we have 40 CEC soils. I'm comfortable making that comment.

Question from Jesus does acid extraction of humic deposits maintain the high anion exchange capacity needed to keep the boron in the soil? I'm not entirely certain. I know that it certainly damages it, and my understanding is that the.

Human fraction is the fraction that best complexes.

Boron and holds it stable, but fulvic.

Acids do as well. And you may notice that I just used the word different from chelation.

I use the word complexing in scientifically correct terminology.

Chelation is only used to refer to cations, positively charged minerals.

And when we talk about anions such.

As boron, the term that is used is complexing. Slightly different terminology describing in at least in practical terms the same types of reactions and mechanisms that we're looking for.

Question from IDO hi, It is thought.

That copper has some toxicity in stone fruit.

Can copper be sprayed on stone fruit.

Crops to reduce fruit cracking?

Ido the answer is yes.

The difference is in the formulation and how it is used.

So there's a difference between copper chelated.

Copper as a nutrient and copper as a bactericide. The copper that is formulated as a bactericide is formulated to remain on the.

Leaf surface and to kill the living.

Organisms that are present on a leaf surface where copper as a nutrient is intended to be absorbed by the plant. And once it is inside the plant and in the fruit, in the case that you're asking of fruit skin, one of the things that copper is known for is to provide elasticity. So limbs and stems become more flexible, they don't break off as easily, and.

Skin also becomes more elastic and doesn't crack quite as easily.

Question what do you think about copper chelated with heptagluconic acid? I don't have experience, so I don't know. That is obviously an organic type of chelation agent, so I would suspect that it will probably be absorbed by the plant well, but perhaps not translocated so well, depending on how rapidly the plant uses that compound. And again, I don't have experience with it, so I really don't know. Question from Ryan Newton.

Can you speak to the effectiveness of fertigation of chelated nutrients, especially the ones.

That are susceptible to oxidation? What we have observed is that as long as they are chelated well, then fertigation is fine. They are absorbed by the plants very effectively.

Question from Niels Korfeld hi Niels, what.

Is the correct oxidation state of iron? The correct is in the reduced form which is in.

I get these mixed up all the time.

I know which it is, but it's one of those things that I get confused on.

I think it is a double positive fe. Not entirely certain of that though.

So Wikipedia will tell you the answer for sure. Question from Steve In a rotational grazing system, when should we aim to apply our foliar applications in front of or behind the mob?

How many days behind our head?

Assuming a 40 day rotation, you want to time your foliar applications when the plant is most able to take advantage of it. So that usually means when you have.

2 to 3 inches, 3 to 4 inches of regrowth.

So at that stage your foliar application.

Produces the biggest crop response, the biggest.

Forage response, because the plant has the most time to take advantage of it.

To increase its photosynthesis. Question from Andrew Johnson Are animals and.

Humans able to use the oxidized forms of micronutrients in plants?

That's a good question, and I don't know the answer. It probably varies between ruminants and monogastric animals and birds. A ruminant animal has a fermentation vat called the rumen, which is anaerobic and reduced by design. So there's a good probability that anything I would guess.

I don't know this answer for sure, but I would think it's reasonable to.

Guess that whatever is absorbed, even in.

The oxidized form, is probably converted to the reduced form in the rumen. Is that also true of the microbiome.

In the digestive tract of a monogastric.

Animal such as ourselves?

I don't know the answer to that. Perhaps just a further comment on that. When we think about human health, it's.

Important to recognize that within human health and nutrition, we use different terminology, or animal health for that reason matter.

We use different terminology to talk about.

Exactly the same thing. So we have oxidation versus reduction, aerobic.

Versus anaerobic, oxidants versus antioxidants. So vitamin C as an antioxidant is.

Simply a very strong reducing agent, as are all these other antioxidants such as resveratrol and anthocyanins and so forth. When you stand on the ground in your bare feet and you earth yourself.

That earthing, that grounding is a flow.

Of electrons that is the equivalent. It's a very strong has a very strong reducing effect.

So there is biophysics terminology and biochemistry.

Terminology that both refer to the exact same processes, but they use different words to describe the same thing. Question from Barbara after approximately 20 years of applying Solubar we are seeing sodium buildup building up in the soil. How do we safely apply boric acid?

First, I would be incredibly surprised if.

You are seeing sodium building up coming from the soluble. I would guess it's probably coming from other places because the quantity of sodium that you're applying in solubor is so small that most plants will absorb it.

And use it and remove it and it won't.

Or even if it cycles within the local environment, it's still extremely small. It's more probable that it's coming from compost.

From ruminant animals that are supplemented with sodium.

That would be my first guess of where the sodium is coming from. Then your follow up question is how do we safely apply boric acid? It's going to be more work to dissolve it and get it solubilized in water, but it's still possible. So you just may need to use.

Hot water and solubilize it and apply.

It in that form.

Question from Dejan I'm asking you to.

Give general recommendations for every phenological stage for foliar applications of boron, cobalt, copper, iron and manganese. It's a good question and I have already given that webinar so that information is already out there in the webinar.

That was just a few months ago titled Managing Nutrition at Critical Points of Influence. A question on what kind of iron fertilizer is the most soluble?

These are questions coming from overseas. Growers here in the United States have the not just in the US but also Mexico and Canada. Here in North America have the opportunity and the privilege of being able to easily access the AEA rebound liquid trace minerals which are reduced and which are chelated.

Producing those types of materials on your.

Own is not impossible, but difficult and challenging and something probably that most people don't want to attempt. So there's lots of questions here coming up in the Q and A from people who want to access these types.

Of materials locally and I don't know.

What companies and what resources are available overseas for you to find these types of materials. That will require research your part to.

See what you can find.

And I'm sorry that I can't give you better information on that question from Barbara in the past you've recommended including molybdenum with all nitrogen applications.

Would this create an excess of molybdenum.

That would have a negative impact on the availability of other nutrients? We've never observed this to be the case. The question of course is what is the application rate that you're applying. So if you're applying an excess, then you will accumulate in excess. But we haven't observed that to be the case in our experience. Question from Derek Is there a best time of day or other conditions for foliar applications? Yes, I have answered this question also in some detail in the webinar on how to properly design a foliar application. And the answer is in the evening.

Is usually the best for most growing conditions in most contexts.

Question after greenhouse soil gets sterilized by steam, it suddenly has substantial availability of manganese shown on soil analysis as well as in SAP analysis, whereas before soil sterilization it shows nearly deficient. Any thoughts on what the mechanism is or how this is possible? Yeah, it's fairly easy actually.

The microbial population will accumulate well, they.

Will extract manganese from the soil mineral matrix and hold them within their microbial cells.

Then when you sterilize that soil with.

Steam, you kill all the biology and.

All of the manganese contained within those.

Microbial cells is now available for plant absorption.

So that's where it's coming from. Question from Steve Can I explain water hydrolysis further? How much of the plant's water requirement.

Is involved in water hydrolysis? So this is the context for this question is that in other webinars I've described the function of manganese and needing to be present for water hydrolysis to split the water molecule into H and oh for the photosynthesis process. And this final question is if manganese is lacking, is the plant's water efficiency reduced or the overall productivity of the plant diminished, or both? The answer, in my understanding is both.

You both slow down the photosynthesis process and as a result of the slowed photosynthesis process, you have increased photorespiration, which.

Requires more water, of course, which lowers the water use efficiency and which also has a drag on plant yield and has a. Has a yield drag effect.

Question about silicon There's a few thoughts on silicon.

I'll just share them briefly. One is like iron, there's abundant silicon in the Earth's crust, about 23%.

And what we've observed on SAP analysis.

Is that there is a direct correlation between microbial activity and silicon absorption.

When we have really good microbial activity, silicon levels go up. This is such a direct effect, such.

A direct correlation that we can actually use silicon absorption as an analog measurement.

For the health of the soil's microbial population, the soil's microbial community. Question Are you familiar with chestnut gall wasp? Can it be controlled with nutrition?

What about the olive fruit fly the answer is I'm not familiar with them.

And even though I'm not familiar with them, I'm confident they can be controlled.

With nutrition because we have never yet.

Discovered any insect or any pest anywhere that cannot be effectively managed with nutrition, including locusts.

Question from Bart Van Andel Hi Bart, does copper sprayed onto tomatoes for disease.

Control distort the copper levels in SAP analysis?

Our experience has been no, that has not been the case. The same is true of manganese and zinc when we have fungicidal or bactericidal type applications of Maneb or mancozeb or Zanib.

Of these various different types of zinc and manganese and copper formulations on the.

Leaf surface, I can't say definitively that.

They never impact SAP analysis reports, But I do know a number of situations where growers are applying significant amounts of these types of applications, and the SAP.

Analysis would actually show that these nutrients were deficient. The same has been true of sulfur when growers have applied powdered sulfur or sprayed sulfur onto the plant. In a number of cases, the SAP.

Analysis comes back and shows a sulfur deficiency.

Now, that isn't always the case. Sometimes they do show high as well. So we haven't looked at this extremely closely, and I can't say definitively that they never show up.

But I do know that there are cases where they actually show up as being deficient when these types of compounds are being applied. There's a question here from Greg on our experience with sea minerals from ocean.