Smart Garage Door - NYCCT Course Project - Spring15

Hello, my name is Jose Herrera and that's my brother and Darian Herrera. We're doing the project called the Smart Garage Door with Professor Lee.

We use Arduino to introduce this project. And we using the fingerprints that is used for opening the door as fingerprint reader. We also have the Bluetooth inside, Bluetooth.

Inside that you can open with your smartphone.

You can open the door easily from far away. And also we have other components for security and safety. As we have here the infrared that is going to if the car is.

Going inside, it's going to block and.

The door is going to stop hitting something also like if go off. We have the switchers inside here to.

Stop the door and not bring it go all the way there. We have switchers here to stop it.

As well. We have another switch in the bottom here to do the same functions. And inside of the component, the mechanism.

That we used was a stepper motor.

For driving two gears with a pulley. Very homemade mechanism here with a pulley. The door is going to be pulled like if you turn on the motor by the fingerprint or the Bluetooth, the door is going to be and to hit the switch. When you hit the switch, it's gonna.

Stop and wait for the command to.

Then come back and close again. Also the application gonna show you when the door is closed or open and he gonna show you like the security. The fingerprints can read up to 50 fingerprints, different fingerprints, very sophisticated fingerprint. And basically this is our project, the Smart garage Door. That' yeah. Right now we're gonna test it. You can see.

I can use the bluetoot giving the command. The door is going up open.

If you hit the switch, going to start.

There's our project. Our project is mine. Garage door. Thank you.