Step-by-step guide to connecting a Star Micronics TSP100 Wi-Fi printer to SalesVu POS on iPad. Load paper, hold the red pair button for two seconds, use your router's WPS button to connect, then add the printer in SalesVu's settings and run a test print.
Two seconds.
SalesVue 5G.
Hi. In this video, we're going to show you how to set up your star micronics tsp 100 wi fi printer. So the first thing it's very easy to set up. The only thing you really need is a paper printer and the power cord. So the first thing you'll do is press this forward, open that up, and drop the paper in. It's very simple like that. And close it up. We'll turn it around, and we'll plug in our power cord. And then we'll turn it on with the switch here. And you can see it's flashing here. It's solid now. So what we need to do is turn it back around, and you'll have a red pair button. Probably can't see it, but it's back there. And you're gonna hold that for two seconds, and then it starts blinking. And you're going to go to your wireless router, which we have here. This is our wireless router. And you're going to press the WPS button. So it'll be a little bit different spot on your router. All modern routers have them now. And after a minute or so, it should connect with your printer. So now it's ready to go. You can see it's solid, solid. And the next thing we're going to do is go to our iPad app, and we're going to go to Settings, and we need to turn on the WI FI and make sure that it's connected to the same network as the wireless router that we paired it with. So in this case, it's our SalesVue 5G, which is now connected. And we'll go to the SalesVue app, touch the Settings button, which looks like a gear in the upper right hand corner, touch printer options, and then search for printers. And there we can see our printer touch test print to verify that it's working. And you can see print out a little slip of paper that says test print. And that's how you set up your star WI FI printer.
